DekTec
HOME>Dektec Hardware
Dektec Hardware

DTE-3137〔Networked DVB-S(2) Satellite Receiver〕
[Features]
- Standalone DVB-S2 receiver supporting QPSK, 8-PSK, 16-APSK and 32-APSK
- DVB-S2 demodulation compliant to EN302-307 and EN301-210, as well as legacy DVB-S support
- Web and SNMP interface for setting parameters and observing status
- Unit can be powered via the Ethernet cable (Power over Ethernet) or through a DC power supply jack
- LNB power insertion
- Full support of SMPTE 2022-1/2, with 2D FEC encoder for robust transport over IP
- LCD status display shows device identifier, mode, carrier frequency, level, SNR, BER and IP/MAC address
- Install up to 12 modules in 3U 19” rack space using DekTec rack-mountable rail
[APPLICATIONS]
- SMATV: Redistribution of satellite TV
- General-purpose receiver for obtaining the full Transport Stream from a DVB-S2 signal
[KEY ATTRIBUTES]
Parameter Value
RF inputs Connector 75-Ω F Female
Return loss >10dB
Tuning Range >950 .. 2150MHz
Sensitivity -30 .. -60dBm
Baud Rate 2 .. 40MBd
LNB Supply 13V/18V 400mA
22kHz tone On/Off
TS output ASI port Connector 75-Ω BNC
DVB-ASI EN50083-9
GigE port Connector RJ-45
Physical layer IEEE 802.3at
Transport TP per IP 1 .. 7; UDP/RTP
FEC SMPTE 2022-1
Device power Connector 2.1 mm DC plug
24V Supply 22 .. 30V; 17W
[STANDARDS]
Standard Description
EN 301 210 DVB-S
EN 302 307 DVB-S2: QPSK, 8-/16-/32-APSK CCM only

[CONTROL]
IP-address assignment DHCP or static
Multicast support IGMP v2
Device management Browser based
Network management SNMP v2c
Discovery WS-Discovery

[ORDERING INFORMATION]
Type Description
DTE-3137 Networked DVB-S(2) Receiver
Please refer to www.dektec.com for the latest pricing and a list of distributors and resellers.