ENGLISH PAGE
Sencore
HOME>Sencore
Sencore Hardware

SMD989

 
SMD989
Overview

The Sencore SMD 989 DVB-S2 platform is capable of single or multi-stream DVB-S2 modulation and demodulation of MPEG Transport Streams. With an optional L-Band upconverter, the SMD 989 can provide an IF or L-band output. This eliminates the need for multiple pieces of equipment. The chassis has two bays allowing the SMD 989 to house one or two independent modulators. The platform provides state-of-the-art modulation quality while saving rack space and cost.
The support of multistream with Variable Coding and Modulation (VCM) allows each Transport Stream in the single RF carrier to have its own modulation parameters. Multistream reduces overall equipment needed and increases the efficiency of transponder use while guaranteeing the integrity of the content.

Features
  • Chassis supports two independent modules
  • Configure with two DVB-S2 modulators, two DVB-S2 receivers or one of each for reception and monitoring
  • Ability to modulate 1 to 6 multistream transport streams on a single carrier (no separate products needed to support multistream)
  • L-band and IF outputs
  • ASI and IP inputs
  • Front panel and web GUI for easy configuration
  • L-band monitoring output
 
Specifications
INPUTS
ASI Max connectors: Up to 4
Connector: BNC
Impedance: 75Ohms
Packet format: Auto detect 188/204 byte
Syntax: SPTS or MPTS
IP Inputs: Receives up to 6 TS streams
Connector Type: (1) RJ 45 10/100/1000
Addressing: Unicast and Multicast
IP Encapsulations: 1 to 7 TS/IP UDP or RTP
Reference External Reference: 10 Mhz Frequency/50 Ohms BNC
Return Loss: 15 dB
Internal Reference: internal reference also present
DVB-S2
Signal Format: CCM / VCM / ACM
Modulation format & FEC rate: QPSK, FEC rates 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10**
8-PSK, FEC rates 3/5, 2/3, 3/4, 5/6, 8/9, 9/10**
16APSK, FEC rates 2/3, 3/4, 4/5, 5/6, 8/9, 9/10**
32APSK, FEC rates 3/4, 4/5, 5/6, 8/9, 9/10**
Roll-off Factor: 0.20, 0.25, 0.30
Number of streams: 1-6
Spectral Inversion: on / off
FEC Frames: Normal
Short
**Rate 9/10 not applicable for short frames
OUTPUTS
IF Frequency: 70 MHz/140 MHz
Level: -30 dBm to -5 dBm
Connector: 75 Ohms BNC
Return Loss: >20 dB
L-BAND Frequency: 950-2150 MHz (adjustable in 1 KHz steps)
Level: -30 dBm to 5 dBm (adjustable in 0.1dB steps)
Connector: SMA 50 Ohms
Return Loss: >15 dB
Monitoring Output: -20 dBc @ main frequency
Spurious Signal Level: -50 dBc in any 4 KHz bandwidth
Phase Noise: 100 Hz -70 dBc/Hz
1 KHz -80 dBc/Hz
10 KHz -90 dBc/Hz
100 KHz -100 dBc/Hz
1 MHz -100 dBc/Hz
MANAGEMENT Connector: RJ-45 10/100 - Auto Negotiate
Protocols: HTTP and SNMP
User Interface: HTML Web Client
DIMENSIONS Height: 1RU, 1.75" (5cm)
Width: 17.4" (44.2 cm)
Depth: 23" (58 cm)
Power: 100-240 AC 50/60 Hz @ 3 Amps
 
Datasheets
 
SMD 989 Datasheet